ROT-SPOA3TM-AP-EH1 3.5 Tonne 2 Post Lift
|
Version with mechanical latching and 3-stage front and rear arms. Recommended for low profile cars.
Read More
High quality 3.5 tonne two post hydraulic vehicle lift with mechanical latching from the Rotary Lift range. With 3-stage front and rear arms. Ideal for low profile vehicles.
- 3.5 tonne lifting capacity
- Electro-hydraulic operation
- Baseless, clear floor design
- Mechanical latching
- 3-stage front arms
- 3-stage rear arms
- Lifting height 1957mm
- Overall height 3765mm
- Height to safety stop 3621mm
- Front arm length 550-1106mm
- Rear arm length 600-1280mm
- Adapter height 94-153mm
- Electrical collection 400v, 50Hz, phase
- Single phase option available
- Lifting time 30 secs
All Rotary two post lifts use a direct, twin ram lifting system which means that there are no ropes, chains or pulleys under load and very few moving parts. Clever column design ensures that the posts are extremely strong whilst their baseless configuration reduces trip hazards and allows free movement of other equipment or toolboxes under the vehicle. Three stage arms are now used on all models to provide extra flexibility in reaching vehicle jacking points. Rotary’s two post lifts are legendary for their extremely long life and very low cost of ownership.!
|
|
ROT-SPOA3TS-AP-EH2 3.5 Tonne 2 Post Lift
|
Version with electronic latching and 3-stage front and rear arms. Recommended for low profile cars.
Read More
High quality 3.5 tonne two post hydraulic vehicle lift with electronic latching from the Rotary Lift range. With 3-stage front and rear arms. Ideal for low profile vehicles. With extra 305mm extended height of top beam.
- 3.5 tonne lifting capacity
- Electro-hydraulic operation
- Baseless, clear floor design
- Electronic latching
- 3-stage front arms
- 3-stage rear arms
- Lifting height 1957mm
- Overall height 4070mm
- Height to safety stop 3936mm
- Front arm length 550-1106mm
- Rear arm length 876-1472mm
- Adapter height 94-153mm
- Electrical collection 400v, 50Hz, phase
- Single phase option available
- Lifting time 30 secs
All Rotary two post lifts use a direct, twin ram lifting system which means that there are no ropes, chains or pulleys under load and very few moving parts. Clever column design ensures that the posts are extremely strong whilst their baseless configuration reduces trip hazards and allows free movement of other equipment or toolboxes under the vehicle. Three stage arms are now used on all models to provide extra flexibility in reaching vehicle jacking points. Rotary’s two post lifts are legendary for their extremely long life and very low cost of ownership.
|
|
ROT-SPOA3TS-5-EH2
|
Version with electronic latching, 3-stage front arms and 2-stage rear arms and extended height top beam.
Read More
High quality 3.5 tonne two post hydraulic vehicle lift with mechanical latching from the Rotary Lift range. With 3-stage front arms and 2-stage rear arms. With extra 305mm extended height of top beam.
- 3.5 tonne lifting capacity
- Electro-hydraulic operation
- Baseless, clear floor design
- Mechanical latching
- 3-stage front arms
- 2-stage rear arms
- Lifting height 1957mm
- Overall height 4170mm
- Height to safety stop 4026mm
- Front arm length 550-1106mm
- Rear arm length 876-1472mm
- Adapter height 94-153mm
- Electrical collection 400v, 50Hz, phase
- Single phase option available
- Lifting time 30 secs
All Rotary two post lifts use a direct, twin ram lifting system which means that there are no ropes, chains or pulleys under load and very few moving parts. Clever column design ensures that the posts are extremely strong whilst their baseless configuration reduces trip hazards and allows free movement of other equipment or toolboxes under the vehicle. Three stage arms are now used on all models to provide extra flexibility in reaching vehicle jacking points. Rotary’s two post lifts are legendary for their extremely long life and very low cost of ownership.
|
|
ROT-SPOA3TS-AP-EH1 3.5 Tonne 2 Post Lift
|
Version with mechanical latching and 3-stage front and rear arms. Recommended for low profile cars.
Read More
High quality 3.5 tonne two post hydraulic vehicle lift with electronic latching from the Rotary Lift range. With 3-stage front and rear arms. Ideal for low profile vehicles.
- 3.5 tonne lifting capacity
- Electro-hydraulic operation
- Baseless, clear floor design
- Electronic latching
- 3-stage front arms
- 3-stage rear arms
- Lifting height 1957mm
- Overall height 3765mm
- Height to safety stop 3621mm
- Front arm length 550-1106mm
- Rear arm length 876-1472mm
- Adapter height 94-153mm
- Electrical collection 400v, 50Hz, phase
- Single phase option available
- Lifting time 30 secs
All Rotary two post lifts use a direct, twin ram lifting system which means that there are no ropes, chains or pulleys under load and very few moving parts. Clever column design ensures that the posts are extremely strong whilst their baseless configuration reduces trip hazards and allows free movement of other equipment or toolboxes under the vehicle. Three stage arms are now used on all models to provide extra flexibility in reaching vehicle jacking points. Rotary’s two post lifts are legendary for their extremely long life and very low cost of ownership.
|
|
ROT-SPOA3TM-5-EH1
|
Version with mechanical latching, 3-stage front arms and 2-stage rear arms.
Read More
High quality 3.5 tonne two post hydraulic vehicle lift with mechanical latching from the Rotary Lift range. With 3-stage front arms and 2-stage rear arms.
- 3.5 tonne lifting capacity
- Electro-hydraulic operation
- Baseless, clear floor design
- Mechanical latching
- 3-stage front arms
- 2-stage rear arms
- Lifting height 1957mm
- Overall height 3865mm
- Height to safety stop 3721mm
- Front arm length 550-1106mm
- Rear arm length 876-1472mm
- Adapter height 94-153mm
- Electrical collection 400v, 50Hz, phase
- Single phase option available
- Lifting time 30 secs
All Rotary two post lifts use a direct, twin ram lifting system which means that there are no ropes, chains or pulleys under load and very few moving parts. Clever column design ensures that the posts are extremely strong whilst their baseless configuration reduces trip hazards and allows free movement of other equipment or toolboxes under the vehicle. Three stage arms are now used on all models to provide extra flexibility in reaching vehicle jacking points. Rotary’s two post lifts are legendary for their extremely long life and very low cost of ownership.
Rotary two post lifts are available in ‘M’ or ‘E’ versions. The ‘M’ series has standard single-side manual controls whilst the ‘E’ series has more advanced features. The ‘E’ models include touch style dual electronic controls, integrated air and electrics and audible warning on lowering – all adding up to a unique package of operational enhancements for the technician.
|
|
ROT-SPOA3TS-5-EH1 3.5 Tonne 2 Post Lift
|
Version with electronic latching, 3-stage front arms and 2-stage rear arms.
Read More
High quality 3.5 tonne two post hydraulic vehicle lift with electronic latching from the Rotary Lift range. With 3-stage front arms and 2-stage rear arms.
- 3.5 tonne lifting capacity
- Electro-hydraulic operation
- Baseless, clear floor design
- Mechanical latching
- 3-stage front arms
- 2-stage rear arms
- Lifting height 1957mm
- Overall height 3865mm
- Height to safety stop 3721mm
- Front arm length 550-1106mm
- Rear arm length 876-1472mm
- Adapter height 94-153mm
- Electrical collection 400v, 50Hz, phase
- Single phase option available
- Lifting time 30 secs
All Rotary two post lifts use a direct, twin ram lifting system which means that there are no ropes, chains or pulleys under load and very few moving parts. Clever column design ensures that the posts are extremely strong whilst their baseless configuration reduces trip hazards and allows free movement of other equipment or toolboxes under the vehicle. Three stage arms are now used on all models to provide extra flexibility in reaching vehicle jacking points. Rotary’s two post lifts are legendary for their extremely long life and very low cost of ownership.
|
|